Download Balena Etcher to your computer.
Hook “toaster” (drive cloner) up to PC.
Turn on.
Insert drive to be cloned (the old one) into the Source slot.
Insert new drive into the Target slot.
Open BalenaEtcher
Clone Drive
Select the source (this is the smaller one that is being cloned onto a bigger drive)
Select the Target (the new bigger drive)
Once you put the new hard drive into the PC, check to make sure that both partitions are being used.
Go into Disk Management (as an admin)
Create and Format Hard Drive
Right click on the partition that is in use (if there is one that is unallocated)
Choose Extend Volume
Continue “next” until it is finished